|
|
Post by bloomcounty on Feb 14, 2012 8:39:04 GMT -5
Is it okay to run an aluminum fuel cell ? also do i need to do anything special with the venting of the cell ? and can i get some recommendations on a fuel pump and regulator ... I'm running a Holley blue pump now dead headed with the junk regulator that comes with it I wanna go to a return style fuel system . this is for a 406 SBC .
|
|
|
|
Post by jmink427 on Feb 14, 2012 20:59:34 GMT -5
I haven't had any issues with my fuel cell... I just bought some aluminum sheet and made mine.. Nothing special about it... It always has some fuel in it.... I still looks like the day I first started running E85.....I been using the same Holley Blue pump I had when running gasoline and the regulator is one with a stainless steel mesh element.....  |
|
|
|
Post by chuffman on Feb 14, 2012 22:44:37 GMT -5
Yeah the aluminum cell is fine,but if this is a healthy 406,you'll probably want at least a Holley black pump with a regulator setup for alcohol......I know lots of people that run a deadhead regulator and get along just fine this way.......Oh yeah,seems like 6.5 psi fuel pressure works great.....  |
|
|
|
Post by Mark Sullens on Feb 15, 2012 9:22:39 GMT -5
Thanks Jeff & Curt for jumping on this....sometimes I get a little busy and dont always have time to respond. Being a 2X E85 Super pro track champion....I think when Curt talks, people should listen....lol Thanks Guys for the help on the forum.......  |
|
